Bambu Lab A1 Mini Combo
The A1 Mini Combo is multi-colour printing in the smallest footprint Bambu makes — the one that fits on a desk in a bedroom or a classroom without taking the whole desk.
Combo bundles the printer with its AMS unit, so multi-colour and multi-material printing work out of the box rather than as a later upgrade.
Buying it from Forgely
- Authorized Bambu Lab reseller. New, sealed retail stock with the full manufacturer warranty, bought from a shop in Utah you can walk back into.
- See it printing first. We run these machines in the store, so you can watch the one you are considering actually print and hold the output before you decide.
- We repair them too. Our technicians service Bambu printers in-house every week, so the advice you get before you buy comes from the bench rather than a catalogue.
- Collect in Roy or Murray. No shipping wait and no freight damage. Printer stock moves daily, so call ahead and we will hold a unit for you.
Specifications
- Build volume: 180*180*180 mm³
- Hotend: Hot End: All-Metal; Nozzle: Stainless Steel; Max Hot End Temperature 300 °C
- Heated bed: Max Build Plate Temperature 80°C
- Speed: Max Speed of Tool Head 500mm/s; Max Acceleration of Tool Head 10000mm/s²
- Materials: PLA, PETG, TPU, PVA: Ideal; ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: Not Recommended
FAQ
Ordering regularly? Wholesale pricing starts at 50+ spools. See wholesale →
You May Also Like
Unopened spools can be returned within 30 days. If a spool you opened turns out to be defective, we'll replace it.
Keep Reading
From the Forgely Blog
Guides and tips that pair with your filament purchase.
Troubleshooting
Most failed prints aren't your printer's fault.
A bad spool can fake every problem on this list. A good one removes the variables. Here's what actually causes each, and what to check before you reprint.
Still stuck?
(385) 449-2694 · Roy Mon–Fri 10–8, Sat 10–6 · Murray Mon–Fri 11–6, Sat 10–6
You'll get a real maker on the line, not a script.