Bambu Lab H2D Combo

The H2D Combo is the dual-extruder machine on Bambu's H2 platform, for printing two materials in one job without a tool change — the common reason people step up from a single-nozzle printer.

Combo bundles the printer with its AMS unit, so multi-colour and multi-material printing work out of the box rather than as a later upgrade.

Buying it from Forgely

• Authorized Bambu Lab reseller. New, sealed retail stock with the full manufacturer warranty, bought from a shop in Utah you can walk back into.
• See it printing first. We run these machines in the store, so you can watch the one you are considering actually print and hold the output before you decide.
• We repair them too. Our technicians service Bambu printers in-house every week, so the advice you get before you buy comes from the bench rather than a catalogue.
• Collect in Roy or Murray. No shipping wait and no freight damage. Printer stock moves daily, so call ahead and we will hold a unit for you.

Specifications

• Build volume: Single Nozzle Printing: 325*320*325 mm³; Dual Nozzle Printing: 300*320*325 mm³; Total Volume for Two Nozzles: 350*320*325 mm³
• Hotend: Max Nozzle Temperature 350 °C; Nozzle: Hardened Steel
• Chamber: Active Chamber Heating: Supported; Max Temperature: 65 °C
• Heated bed: Max Heatbed Temperature 120 ℃
• Speed: Max Speed of Toolhead 1000 mm/s; Max Acceleration of Toolhead 20,000 mm/s²
• Materials: PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA CF/GF, PPS, PPS CF/GF