Bambu Lab AMS HT

The AMS HT is the high-temperature unit in Bambu Lab's Automatic Material System range: it dries filament at up to 85 °C, and it has a bypass outlet so soft or brittle filament such as TPU can feed straight through rather than round the spool path. Bambu list it as compatible with all their printers, though some need an accessory (an A1 needs the A1 AMS Hub). We stock all three AMS units and service them on our own bench, so if you are choosing between this and the AMS 2 Pro, ask us.

Buying it from Forgely

• Authorized Bambu Lab reseller. New, sealed retail stock with the full manufacturer warranty, bought from a shop in Utah you can walk back into.
• We run and repair these. Our technicians service Bambu hardware in-house every week, so the advice you get before you buy comes from the bench rather than a catalogue.
• Collect in Roy or Murray. No shipping wait and no freight damage. Call ahead and we will hold a unit for you.

Specifications

• Compatibility: Compatible With All Bambu Lab Printers. The AMS HT requires specific accessory configurations for various Bambu Lab 3D printers.
• Body Dimensions: 114*280*245 mm³
• Net Weight: 1.21 kg
• Printing Filament Supported: PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF/PAHT-CF/PETG-CF/Support for PLA/PETG, and TPU for AMS.
• Bypass Filament Outlet: TPE, generic TPU, Bambu PET-CF/TPU 95A, and other filament that contains carbon fiber or glass fiber.
• Filament Not Supported: PVA (damp), BVOH (damp)
• Filament Diameter: 1.75 mm
• Spool Dimension: Width: 50 mm-68 mm; Diameter: 197 mm-202 mm
• Drying Maximum Temperature: 85 °C
• Voltage: DC: 24 V; AC: 100 V–240 V~, 50 Hz/60 Hz
• Average Power: 150 W