Bambu Lab H2S
The Bambu Lab H2S is a large-format, single-nozzle 3D printer built on Bambu's H2 platform. It pairs a 340 × 320 × 340 mm build volume with an actively heated enclosed chamber and a 350 °C hotend, so it handles everything from everyday PLA to engineering materials like ABS, ASA, PC, nylon and carbon-fiber blends.
- Build volume: 340 × 320 × 340 mm
- Hotend: up to 350 °C with a hardened-steel nozzle
- Chamber: actively heated, up to 65 °C
- Heated bed: up to 120 °C
- Speed: up to 1,000 mm/s, 20,000 mm/s² acceleration
- Materials: PLA, PETG, TPU, ABS, ASA, PC, PA, PET, PPS, PVA/BVOH and fiber-reinforced grades
- Multi-color: compatible with the Bambu AMS 2 Pro
- Monitoring: multiple cameras and sensors for AI-assisted print-failure detection
Buy it from a local Utah dealer: see it in person at our Roy or Murray store, and get setup help and repair support from a team that works on Bambu machines every day.
FAQ
Ordering regularly? Wholesale pricing starts at 50+ spools. See wholesale →
You May Also Like
Unopened spools can be returned within 30 days. If a spool you opened turns out to be defective, we'll replace it.
Keep Reading
From the Forgely Blog
Guides and tips that pair with your filament purchase.
Troubleshooting
Most failed prints aren't your printer's fault.
A bad spool can fake every problem on this list. A good one removes the variables. Here's what actually causes each, and what to check before you reprint.
Still stuck?
(385) 449-2694 · Roy Mon–Fri 10–8, Sat 10–6 · Murray Mon–Fri 11–6, Sat 10–6
You'll get a real maker on the line, not a script.