Help / Troubleshooting
Why does my PLA warp?
PLA should not warp much. If it is, three things to check before blaming the spool.
PLA shouldn't warp much. If it is: bed temp too low, draft hitting the print, or part too tall for the bed adhesion you've got. Set bed to 60 °C, close the printer enclosure or move it out of an air stream, and add a brim for any part taller than 50 mm.
Need a human?
(385) 449-2694 · Roy Mon–Fri 10–8, Sat 10–6 · Murray Mon–Fri 11–6, Sat 10–6